One product can’t do it all. We have developed a full line of protective coatings focused on meeting the highest industry standards for a variety of applications. Contact us for technical data sheets.
Arma 100 APU
Bedliner and truck applications.
ARMA 100 APU is a two component, polyurethane/polyurea elastomer system used for bedliners. This product provides a flexible but extremely tough monolithic membrane with excellent water and chemical resistance with a vast variety of other applications.
Arma 101/102
Arma101/102 is a high solids, moisture-catalyzed, single-component polyurethane coating system. It consists of Arma101, an aromatic polyurethane basecoat, and ARMA 103, a UV-resistant, 100% aliphatic polyurethane topcoat. This product is effective as a protective membrane over polyurethane foam on new or existing roofs and hot or ambient storage tanks.
Arma 103
Arma 103 is a low VOC aliphatic topcoat available to meet VOC regulations in specific areas. It is used in combination with Arma 101. It is used as a UV resistant topcoat for any of the Arma polyurea coatings, predominantly for RV roofs.
Arma 120
Arma 120 is a two-component, 100% solids polyurethane elastomer. It is equally effective under dry abrasive and/or corrosive environments. This product is potable water coating certified.
Arma 901 Series
Heavy duty uses.
The 901 series is a two-component, polyurea elastomer spray system that can be applied under harsh environmental conditions. These products are non-hydrophobic with excellent chemical and abrasion resistance, providing excellent elongation.
- Water and sewage treatment and containment
- Chemical tanks
- Boat hulls
- Pipes, tunnels and reservoirs
- Agricultural and mining equipment
- Highway markings
- Asbestos and lead encapsulate
901-50DS
Fish ponds
Recommended for secondary containment needs including:
- Geotextile fabrics
- Gravel and sludge trucks
- Sludge hoppers
- Processing plants
- Any high-abrasion areas
- Fish hatcheries, pond linings
901-70DS
Recommended for fly ash containment needs including:
- Smoke stacks
- Cement plants
- Dump trucks
- Hoppers and chutes
- Wear areas in processing plants
901-90AS (800% Elongation)
Muhara Ohashi Bridge in Japan
Recommended for containment areas where a balance between abrasiveness and high-impact absorption is needed:
- Military applications
- Bridges
- Industrial concrete and wooden floors
- Utility vaults
- Water protection in buildings and commercial structures
Arma 60A
This polyurea/polyurethane hybrid is waterproof, soft and rubber-like. It is skid-resistant and provides an extremely tough monolithic membrane for flexible surfaces. This product exhibits excellent abrasion and chemical resistance and contains no VOCs.
- White water rafts and flotation devices
- Animal trailers
- Boat and outdoor seating
- Playground equipment
- Areas requiring strong grip
- Sandblasting areas (street sweepers or high-impact processing areas)
Arma 400
This two-component 100% solid cast urethane elastomer is recommended for high temperature applications where thermal stability is required. Often used for dump-truck beds, this product provides a hard, glossy surface necessary for smooth movement of cargo during tilt unloading.
Paint Stripper
Learn more about our environmentally-friendly paint stripper and epoxy remover.
Spray Foam
Learn more about our spray foam and insulation products.
Contact us
Contact us to learn more about our products or to become a dealer.